Got a really wide window that feels impossible to cover, right? You're not alone if you've wondered, Can I put 2 blinds on a large window. It seems like a simple question, but the answer opens up a world of better light control and easier use for those expansive views.
We tackle this common challenge and show you exactly why splitting the difference with two blinds is often your best move.
Here's what you'll find out:
● If putting two blinds on one window works
● Why it's actually a great idea for big windows
● How to measure and install them correctly
● Pro tips for making them look seamless
When you go this route, choosing the right quality is key. Our Blinds Magic smart motorized options make controlling even split setups super simple. You get smooth operation every time.
TL;DR
Short on time? Here's the quick rundown:
● Yes, you absolutely can put two blinds on a large window, and it's often the smartest move.
● Splitting big windows into two blinds gives you way better control and puts less stress on the shades.
● Getting precise measurements for the two individual blinds and their gap is crucial for installation.
● Simple tricks like using a single valance help make paired blinds look like one seamless unit.
● Modern motorized blinds, like ours at Blinds Magic, make controlling two blinds on a large window effortless.
Yes, You Can Use Two Blinds
You've got a generously sized window, and you're probably wondering, "Can I really put two blinds on a large window?" The answer is a resounding yes. It's not just possible; for many large openings, it's actually the smart, practical approach.
Problems With One Big Blind
Trying to cover a truly massive window with a single blind often creates more hassle than it's worth. We see it all the time.
● Heavy Lifting: A blind that spans ten feet or more collects a lot of material. This makes it incredibly heavy. Pulling it up and down manually becomes a workout.
● Uneven Operation: That weight also makes smooth operation tricky. Large manual blinds often want to lift unevenly, getting crooked or stuck halfway.
Why Two Blinds Work Better
Splitting the coverage into two separate blinds solves these headaches directly. Each individual blind is smaller, lighter, and much easier to handle.
Here’s why opting for two is a winner:
● Easier Control: You get simple, smooth lifting and lowering without straining yourself. Each blind operates independently.
● Flexible Light & Privacy: Need sun on one side of the room but not the other? Two blinds give you that split control. Adjust each section exactly how you like.
● Potentially Better Aesthetics: Sometimes, the sheer scale of one giant blind looks overpowering. Two blinds can break up the window area visually, giving a balanced look, especially with coordinating patterns or colors.
It just makes sense from a usability standpoint. Plus, with modern solutions like Blinds Magic smart motorized shades, operating even two blinds becomes effortless. You can control them individually or often group them to raise or lower together with a simple tap or voice command. It truly simplifies managing large windows.
Smart Reasons For Two or More Blinds
So we know you can do it, but let's talk more about why it's such a solid strategy for big windows. It goes beyond just fixing the "too heavy" problem. This approach brings some real benefits you'll appreciate every single day.
Gain Better Control
One of the biggest wins with two blinds is the fine-tuned control you get. A single large blind is an all-or-nothing situation most of the time.
With two:
● You easily adjust light levels or privacy on just one side of the window.
● Block glare on your TV without darkening the entire room.
● Let the sun in partway through the day, then shade up the other side.
This level of flexibility is a game-changer, especially for windows spanning large living areas or bedrooms.
Easier On The Blinds (And You)
Less stress on the blind means less stress for you down the road. Splitting the width halves the load on the lifting mechanisms for each unit.
This can lead to:
● Smoother, more reliable operation over time.
● Potentially a longer lifespan for your blinds.
● Way less frustration trying to yank or coax a heavy blind into place.
This is particularly true with systems built for performance. Our Blinds Magic shades, especially the motorized ones, are designed to handle regular use smoothly, making them perfect for splitting large windows. The motor does the work, ensuring gentle, even lifting every single time, which definitely adds to the blind's life.
Looks Can Be Better
Sometimes, two blinds simply look more balanced and intentional on a very wide window than one giant sheet of material. It provides a visual break. You can even choose slightly different textures or opacities if you want, though matching them is the classic look.
Measure & Install Two Blinds
Putting two blinds on a large window needs a little planning, but it's definitely a DIY-friendly project if you take it step-by-step. Getting your measurements precise is the most important part.
Getting Measurements Right
This is where you pay close attention. You're measuring the total window opening, but you need to order two separate blinds that will fit side-by-side.
Here's the breakdown:
1. Measure Total Width: Measure the width of your window opening in at least three places (top, middle, bottom). Use the narrowest measurement if you're doing an inside mount.
2. Decide the Split: Most people split the width right down the middle. Divide your total width measurement by two. This gives you the target width for each of your two blinds.
3. Account for the Gap: You'll need a small deduction from that half-width measurement for each blind. This creates a tiny gap in the center where the two blinds meet, preventing them from rubbing and allowing for the center bracket placement. The exact deduction depends on the blind type and manufacturer, but it's usually around 1/2" to 3/4" total for the center (so subtract 1/4" to 3/8" from each blind's calculated width).
4. Measure Height: Measure the height in a few places, too, using the longest measurement for inside mounts.
Pro Tip: Double-check your numbers. Measuring wrong is the biggest hiccup people hit.
Installation Steps
Installing two blinds is much like installing one, you just have an extra bracket in the middle.
Follow these steps:
1. Mark Bracket Locations: Mark where your end brackets will go. Then, find the exact center of the window width and mark where the two center brackets will meet. The specific spacing from the center mark will depend on your blind's headrail and brackets – your installation guide shows this.
2. Install Brackets: Secure all your mounting brackets firmly using appropriate fasteners for your wall or window frame.
3. Mount the Blinds: Attach each blind's headrail to its set of brackets. For many modern designs, like our Blinds Magic shades, the headrail simply pushes and clips into place.
4. Test Operation: Make sure both blinds lift, lower, and sit correctly.
Using a system like Blinds Magic means you get clear, specific measuring guides tailored to their products, plus intuitive installation hardware designed to make this process as smooth as possible. We want to make sure you get a great fit and an easy setup.
Tips For a Seamless Look
Once you've got your two blinds measured and installed, you want them to look like they belong there – not just two separate pieces crammed together. A little attention to detail makes a big difference in how professional it all turns out.
Close That Center Gap
You'll naturally have a small gap in the middle where the two blinds meet. The goal is to make this as minimal as possible.
● Precise Measurement: This goes back to getting your measurements spot-on and accounting for the deduction needed for the center.
● Bracket Placement: Make sure your center brackets are positioned correctly according to the manufacturer's instructions so the headrails butt up neatly.
While you might not eliminate the gap entirely (it's necessary for function), minimizing it makes the split less noticeable.
Consistent Materials Matter
If your blinds have a pattern or a specific texture, or even just a color that varies slightly between dye lots, ordering both blinds at the same time is crucial. This helps ensure they come from the same batch.
This guarantees the colors and patterns line up or match as closely as possible, making the two blinds look like sisters, not just distant cousins.
Use a Valance
Want the ultimate trick to hide the split? Add a single, continuous valance that spans the entire width of the window, covering the headrails of both blinds.
A valance gives the appearance of one long, unified window treatment across the top. It completely camouflages the break between the two blinds underneath, giving you that polished, built-in look.
Choosing quality blinds helps, too. Our Blinds Magic shades are designed with clean headrails and consistent materials that contribute to a tidy look, and we offer matching valances to help you achieve that perfectly seamless finish.
Wrapping Up: Blinds Magic For Big Windows
Wrapping up, you absolutely can use two blinds on a large window, and doing so brings some real benefits we explored. It makes handling those wide spaces much simpler and gives you more control over your light and privacy.
Here are the key things to remember:
● Using two blinds is a practical solution for wide windows.
● It means lighter blinds, easier operation, and better control.
● Proper measuring for the gap is crucial for a good fit.
● Simple tips help you make the split look intentional and clean.
This is where choosing the right product truly shines. Our Blinds Magic smart motorized shades take the ease of using two blinds on a large window to the next level, providing effortless control and a beautiful, functional finish for your home.
FAQs
Can you put two blinds on one big window?
Absolutely, yes. It's a very common and practical solution for wide windows that are too large for a single blind. It helps manage weight and makes the operation much smoother.
Do you put blinds on big windows?
People definitely use blinds on big windows. They provide essential light control, privacy, and insulation. For the largest windows, splitting the coverage into two or more blinds is often the most effective way to do it.
Which is better, 1 or 2 blinds for a big window?
For a truly large window, two blinds are generally better than one. A single, massive blind can be heavy, difficult to operate smoothly, and prone to issues. Two smaller blinds on the same window opening provide easier control and often function more reliably over time.
What is the maximum width for blinds?
This limit varies quite a bit depending on the type of blind (like roller, cellular, or wood) and the specific manufacturer. However, most single blinds start facing functional challenges like excessive weight and bowing somewhere between 8 to 10 feet wide. This is exactly why splitting into two blinds is the go-to method for widths beyond that range.
